CRDM SLS Performance and Capacity

- SLS is our fastest prototyping technology 

- PA12 (Nylon) or PA12-GF parts tough functioning parts

- Typically 2 - 3 day turn around (order today, build tonight, ship tomorrow!)

- ALM Production parts (high volumes of parts from 3D build volume) with vibro finishing part processing  

- Significantly better surface definition when component is built with 0.1mm rather than 0.2mm layers

- (0.1mm layer thickness is standard for CRDM SLS parts)

- Manufacturing SLS Parts since 1997

- Over 900 hours per week

- Over 40,000 parts per annum

- Purpose Built SLS Facility

- Batch to batch repeatability

Available Materials: 

PA12 Polyamide (Duraform) & PA12-GF (Duraform GF)

The PA12 and PA12-GF  30% GF Nylon materials used in the SLS (Selective Laser Sintering) system offers the most durable prototype parts from any RP system. The tough Nylon 12 is heat resistant up to 150ºC and is the obvious choice for functional prototypes that are to be used in working situations. 

With an improved accuracy and smoother surface quality this system now suits all manufacturing sectors. The GF 30% material offers a much stiffer and slightly higher HTD, when a more rigid structure is required. Please refer to to CRDM Tolerance Standardsfor SLS tolerances.

SLS - Selective Laser Sintering prices are generally lower than SLA modeling due to the reduced post finishing required from this powder based system. The self supporting powder system also has the advantage of a multiple build option where large numbers of the same component can be built in one build, drastically reducing the individual part cost. This has applications for direct manufacturing and low-volume prototype runs.

High Performance SLS Materials

CARBONMIDE

CRDM has introduced a new generation of structural SLS (Selective Laser Sintering) materials to complement the Duraform materials.

One of these is Carbonmide. A naturally black, carbon filled, light weight, material which was originally designed for wind tunnel usage. The 0.05mm long carbon strand makes up 50% of the total density, the remainder being Polyamide (Nylon 12).

Strength and stability under wind-load and vibration makes this the preferred SLS (Selective Laser Sintering) material for F1 and aerospace use. Coupled with its high heat deflection temperature of 175°C Carbonmide is well suited to the most arduous task.

Carbonmide's light weight, high UTS characteristics, excellent surface finish, and resistance to wear, compared to standard SLS (Selective Laser Sintering) PA12 and SLS PA12-GF, also lends the technology to the low-volume direct manufacture of parts for race-cars and motorcycles, without the weight penalty.

Carbonmide offers an alluring, black, sparkling look, appreciable in many design applications. Carbonmide is particularly suited to applications which require superior mechanical properties, extremely high performance.

Aluminium Filled Polyamide (PA12-AL)

PA12-AL is made up of 50% fine aluminum powder suspended in PA12 Polyamide (Nylon 12).

A Typical application for PA12-AL is the manufacture of stiff parts of metallic appearance for applications in automotive manufacture (e.g. wind tunnel tests or parts that are not safety relevant), for tool inserts for injection moulding small production runs, for illustrative models (metallic appearance), and for jig manufacture, among other aspects.

The surfaces of parts made from PA12-AL can be finished by grinding, polishing, or coating. An additional advantage is that low tool-wear machining is possible, e.g. milling, drilling, or tuning.

DURAFORM EX

This impact-resistant plastic offers the toughness of injection-moulded polypropylene and ABS. Duraform EX’s finer powder grain size results in a much smoother surface finish and the extra strength makes Duraform EX perfect for ‘living hinges’ (please discuss any live hinge requirements with one of our engineers before ordering) and functional prototypes that require end-use performance properties, and is suitable for Rapid Manufacturing.

Available Technology

CRDM Ltd operates 6 X SLS (Selective Laser Sintering)machines. 

With this large capacity we are now offering a lead time of just 2-3 days and a maximum build area of 380mm X 350mm X 400mm.

Available Finishes

Chrome Plating & Vacuum Metalising – Bright, Satin, Silver or Gold
Full Painting and Graphics Service - References to Pantone, NCS, Ral, and VDI or Moldtech specified by you.

How SLS - Selective Laser Sintering works